Updating the Firmware and Driver
www.lsi.com/channel/products 183
9 Click the Driver tab, and then click the Update Driver button.
10 Step through the Hardware Update Wizard screens.
Select the options that allow you to specify where the driver files exist.
If you are asked whether you want to connect to Windows Update, select
“No, not this time” and click
Next.
11 If the Digital Signature Not Found screen appears, click Yes to continue
and follow the instructions to complete the driver installation.
12 When the
Completing the Hardware Update Wizard screen appears,
click
Finish.
13 If you are prompted to restart the system, do so.
Shortly after clicking
Finish, or after the machine reboots, the first screen
of the Hardware Update Wizard appears again, informing you that
Windows has found new hardware.
Updating the 3ware Driver Under Red Hat or
Fedora Core
The following steps describe how to update the 3ware driver under Red Hat.
To update the 3ware driver under Red Hat
1 Download and extract the driver, as described under “Downloading the
Driver and Firmware” on page 178.
2 Backup any critical data prior to updating the 3ware driver.
3 Change the directory to the location with the extracted driver.
4 Copy the files to the appropriate directory.
(In the commands below, replace <version> with the applicable Red Hat
or Fedora Core version, such as ws5 or fc11, and replace <kernel string>
with the applicable kernel, for example 2.6)
Note: The name of the module you will copy (3w-sas.*) varies,
depending on the kernel; however you will always copy it to a file named
3w-sas.ko for 2.6 kernels
For Red Hat or Fedora Core Uniprocessor
Note: Backup your original driver before updating in case you need to revert back
to it. However, you will not be able to revert back to the original driver if you are
booting from that unit.
urenrjrjkvnm
Med
urenrjrjkvnm
coin
coin
Cinema