LSI MegaRAID SAS 9286-8e User's Guide download pdf (Page 44)

LSI Corporation

- 44 -

6Gb/s MegaRAID SAS RAID Controllers User Guide

August 2012

Chapter 3: MegaRAID SAS RAID Controller Characteristics

6Gb/s MegaRAID SAS RAID Controller Family

3.1.5 MegaRAID SAS 9266 RAID Controllers

The MegaRAID SAS 9266-4i low-profile SAS/SATA RAID controller controls four internal SAS/SATA ports through one

SFF-8087 mini SAS 4i internal connector.

The MegaRAID SAS 9266-8i low-profile SAS/SATA RAID controller controls eight internal SAS/SATA ports through two

SFF-8087 mini SAS 4i internal connectors. This controller supports a nonvolatile CVFM02 module that connects to a

CVPM02 module to provide backup for your data in case of power loss.

3.1.5.1 MegaRAID SAS 9266 RAID Controller – Board Layout and Jumper/Connector Information

This subsection provides the board layout, and the connector and jumper information for the MegaRAID SAS 9266-8i

RAID controller.

The following figure shows the jumpers and the connectors on the RAID controller. The jumpers are set at the factory,

and you usually do not need to change them.

Figure 16 Layout of the MegaRAID SAS 9266-8i RAID Controller

NOTE The MegaRAID SAS 9266-4i RAID controller does not contain the J5B1 connector, which supports

ports 4 to 7. The J5B1 connector is on the MegaRAID SAS 9266-8i RAID controller.

3_00890-01

J3A1

J4B1

J3L1

J5A2

J6B3 J6B5

J6B6

J6B4

J6B2

J6B1

J1A3

J2B4

J1A2

J1A4

J1B1

J5A1

J5B1

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 91 92

No comments

LSI MegaRAID SAS 9286-8e User's Guide Page 44