LSI MegaRAID SAS 9286-8e User's Guide download pdf (Page 41)

LSI Corporation

- 41 -

6Gb/s MegaRAID SAS RAID Controllers User Guide

August 2012

Chapter 3: MegaRAID SAS RAID Controller Characteristics

6Gb/s MegaRAID SAS RAID Controller Family

3.1.4.2 MegaRAID SAS 9265CV-8i RAID Controller – Board Layout and Jumper/Connector Information

This subsection provides the board layout, and the connector and jumper information for the MegaRAID

SAS 9265CV-8i RAID controller.

The following figure shows the location of the jumpers and the connectors on the MegaRAID SAS 9265CV-8i RAID

controller. The jumpers are set at the factory, and you usually do not need to change them.

Figure 15 Layout of the MegaRAID SAS 9265CV-8i RAID Controller

J2B3 Advanced Software Options Hardware Key header 3-pin header

Enables support for the Advanced Software Options

features, which include CacheCade, FastPath, Recovery, and

SafeStore disk encryption.

J2B4 Standard Edge Card connector The RAID controller interfaces with the host system though a

standard edge card.

This interface provides power to the board and an I

interface connected to the I

C bus for IPMI.

J5A1 Serial Universal Asynchronous Receiver/Transmitter

(UART) connector for the Expander

4-pin connector

Reserved for LSI use.

J5B1 Board-to-board Mezzanine connector 240-pin DDR3 nonvolatile memory module interface

Connects the controller directly to a CVFM module. The

CVFM module can connect to an optional remote LSIiBBU09

intelligent battery backup unit.

Refer to the MegaRAID LSIiBBU09 Intelligent Battery Backup

Unit Quick Installation Guide for the procedure used to

connect a CVFM module to a remote LSIiBBU09 unit.

J6A1 Serial Universal Asynchronous Receiver/Transmitter

(UART) connector for the expander

4-pin connector

Reserved for LSI use.

NOTE Pin 1 on the headers and connectors is highlighted in red in the previous figure.

Table 8 MegaRAID SAS 9265-8i RAID Controller – Jumpers and Connectors (Continued)

Jumper/

Connector

Type Description

3_00792-00

J2B1 J2B2

J1A1

J1A2

J1A3

J1A4

J1A5

J1A7

J2B4

J5B1

J5A1

J6A1

J1B1

J2B3

J1A8

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 91 92

Comments to this Manuals

No comments

LSI MegaRAID SAS 9286-8e User's Guide Page 41

Comments to this Manuals

Related products and manuals for RAID controllers LSI MegaRAID SAS 9286-8e