LSI SAS 9300-4i SGL User's Guide download pdf (Page 6)

LSI Corporation

- 6 -

LSI SAS 9300-4i PCI Express to 12Gb/s SAS Host Bus Adapter User Guide

March 2013

LSI SAS 9300-4i HBA Characteristics

Physical Characteristics

SATA+SAS Connector (J1). The LSI 12Gb/s SAS HBA supports a SATA and SAS connector through an SFF-8643

mini-SAS HD, internal connector.

5.4 Physical Characteristics

The LSI 12Gb/s SAS HBA is a 6.0-in. × 2.7-in., low-profile board. The component height on the top and bottom of the

LSI 12Gb/s SAS HBA is in accordance with the PCIe specification. The following figure shows the HBA board layout.

Figure 1 LSI SAS 9300-4i HBA Board Layout

 EC1 – PCIe x8 board edge connector

 CR1 – Heartbeat LED

 J1 – SFF-8643 mini-SAS HD, internal, right-angle connector

5.5 Electrical Characteristics

The maximum power requirements for the LSI SAS HBA under normal operation are as follows:

 PCIe 12.0 V = 1.46 A

 Power values:

— Nominal = 10.2 W

— Worst case = 17.5 W

5.6 Thermal and Atmospheric Limits

The atmospheric limits for the LSI 12Gb/s SAS HBA are as follows:

 Temperature range: 0 °C to 55 °C (32 °F to 131 °F) (dry bulb)

 Relative humidity range: 5% to 90% noncondensing

 Maximum dew point temperature: 32 °C (89.6 °F)

 Minimum airflow: 200 linear feet per minute

%#

#2

*

?

,3)3!3

1 2 3 4 5 6 7 8 9

No comments

LSI SAS 9300-4i SGL User's Guide Page 6